聚乙烯防腐涂层冲击试验机-导管式

CLC-E

一、聚乙烯防腐涂层冲击试验机满足尺度：

SY0315-2005T 钢质管路单层熔结环氧粉末表涂层技术规范

GB/T 23257-2009 埋地钢质管路聚乙烯防腐层-附录K

二、聚乙烯防腐涂层冲击试验机产品概述：

本设备重要利用于肯定质量的锤头升到的高度后，垂直着落至被测试品后，检测对样品的粉碎水平。

本设备通过无限？亟谠旎セ坏缁钠舳芄唤谠齑竿犯叨鹊钠鹇，通过？乜乩唇谠於源竿返奈荡骺。通过限位开关节造锤头起落的凹凸。

锤头通过导管自由着落，本仪器操作单一，使用方便。

三、聚乙烯防腐涂层冲击试验机技术指标：

1. 有效冲击高度：1500MM
2. 锤头沉量：2000g±2g,1000g±2g
3. 锤头直径径：Φ25MM ，Φ16MM
4. 锤头材质：淬火钢造锤头
5. 基座沉量：≥40KG
6. ？卮竿纷远鹇
7. ？刈远掖负涂痛竿
8. zui大试样尺寸：直径300NN
9. 设备尺寸：长*宽*高-900*600*2200（MM）
10. 设备沉量：100KG

四、聚乙烯防腐涂层冲击试验机尺度配置：

1. 主  机  一台
2. 测控箱  一台
3. 锤  头  两把
4. 试样支座  一个
5. 钢板尺 一个
6. 高度限位开关 一个
7. 电 机 一台
8. ？卦砍 二把
9. 水平泡 二个

英文简介如下：

Polyethylene anticorrosion coating impact test machine - catheter

CLC-E

==================================================

A, polyethylene anticorrosive coating impact test machine to meet the standard:

SY0315-2005T steel pipeline fusion bonded epoxy powder coating technical specification

GB/T 23257-2009 polyethylene coating for buried steel pipeline - appendix K

=================================================

Two, polyethylene anticorrosive coating impact test machine product overview:

This equipment is mainly used to hammer quality up to a specified height, vertical drop to the tested product, the extent of damage detection of samples.

This equipment by unlimited remote control AC motor starting can control the hammer height fluctuation, through the remote control switch to control the adsorption and release of the hammer. The limit switch control hammer lifting height.

Hammer through the catheter free fall, the instrument has the advantages of simple operation, easy to use.

====================================

Technical indicators three, polyethylene anticorrosive coating impact test machine:

1, the effective impact height: 1500MM

2, hammer weight: 2000g ± 2G, 1000g ± 2G

3, hammer diameter: Phi 25MM, Phi 16MM

4, hammer material: quenching steel hammer

5, the base weight: ≥ 40KG

6 hammer, remote automatic lifting

7, remote control automatic hammer hanging and release the hammer

8, the maximum sample size: 300NN diameter

9, the size of the equipment: length * width * height -900*600*2200 (MM)

10, the weight of equipment: 100KG

===================================

Four, polyethylene anticorrosive coating impact test machine standard:

1, the main machine

2, control box

3, hammer head tw

4, a specimen holder

5, a steel ruler

6, the height limit switch a

7, the electric machine

8, the remote control key two

9, a level bubble two